ZIG SIM1.5.1 - App Store
You'll be able to see results in few seconds.
Publisher Description
ZIG SIM is an application for physical prototyping.
Stream mobile device sensor data to your computer in real time over a network, and connect to creative tools like Max/MSP, TouchDesigner, Processing, and
Unity via OSC protocol - enabling interactive experiences and rapid prototyping.
Supported Sensors & Features
Acceleration / Gravity / Gyro / Quaternion / Compass / Pressure / GPS / 2D Touch / Touch Radius / 3D Touch / Beacon / Proximity Monitor / Mic Level / Remote Control
---
Need more sensors and advanced features? Upgrade to ZIG SIM PRO, which adds NDI output, ARKit, image detection, NFC, Apple Pencil support, and more.
ZIG SIM PRO: https://apps.apple.com/app/id1481556614
Version History Now compatible with iOS 26.
Rebuilt the networking layer for improved connection stability and
reliability — fixing timeout and communication freeze issues. Also
fixed several bugs including OSC message formatting, with broad
stability improvements throughout the app. 1.5.1 Jun 19 Between the app is launching, idle timer is disable.
Between OSC mode, touch force and touch radius OSC address is changed. 1.3.2 02/17/2017 * This version fix OSC Address Bug.
[About touch coordinates]
The XY coordinates are handled as relative coordinates from -1 to 1.
[About Device Information]
We send the number of pixels of vertical and horizontal display, the type of OS and OS version.
[About OSC address]
We changed OSC address "/ / UIGID / Sensor" to "/ ZIGSIM / UUID / Sensor".
[About OSC Device Information]
we sends device information with OSC Mode like JSON Mode.
[Touch in case of OSC, About Beacon]
We send the total number of touches from "/ ZIGSIM / UUID / touchcount".
We send the total number of beacons from "/ ZIGSIM / UUID / beaconcount". 1.3.1 02/16/2017 [About touch coordinates]
The XY coordinates are handled as relative coordinates from -1 to 1.
[About Device Information]
We send the number of pixels of vertical and horizontal display, the type of OS and OS version.
[About OSC address]
We changed OSC address "/ / UIGID / Sensor" to "/ ZIGSIM / UUID / Sensor".
[About OSC Device Information]
we sends device information with OSC Mode like JSON Mode.
[Touch in case of OSC, About Beacon]
We send the total number of touches from "/ ZIGSIM / UUID / touchcount".
We send the total number of beacons from "/ ZIGSIM / UUID / beaconcount". 1.3.0 02/14/2017 Fix JSON Bug.
Rebuild for including iOS10. 1.2.1 09/20/2016 We added new 3 sensors.
・Proximity Monitor
・Mic Level (Mic Volume)
・Remote Control (headset remote control) 1.2.0 09/16/2016 Fix OSC Bug. 1.1.1 08/26/2016 [About Sensor]
Add Gravity Sensor.
[About Settings]
Add Local File Mode.
Add TCP Mode.
Support IPv6. 1.1.0 08/23/2016 ・Bug fix for using OSC format.
・Bug fix for removing touch point data. 1.0.3 06/03/2016 1.0 05/25/2016
About ZIG SIM
The company that develops ZIG SIM is 1-10, INC.. The latest version released by its developer is 1.5.1.
To install ZIG SIM on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2026-10-13 and was downloaded 0 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the ZIG SIM as malware if the download link is broken.
How to install ZIG SIM on your iOS device:
- Click on the Continue To App button on our website. This will redirect you to the App Store.
- Once the ZIG SIM is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
- If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
- After ZIG SIM is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
- Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.
Program Details
System requirements
Download information
Pricing
Version History
version 1.5.1
posted on 2026-10-13
Version History Now compatible with iOS 26.
Rebuilt the networking layer for improved connection stability and
reliability — fixing timeout and communication freeze issues. Also
fixed several bugs including OSC message formatting, with broad
stability improvements throughout the app. 1.5.1 Jun 19 Between the app is launching, idle timer is disable.
Between OSC mode, touch force and touch radius OSC address is changed. 1.3.2 02/17/2017 * This version fix OSC Address Bug.
[About touch coordinates]
The XY coordinates are handled as relative coordinates from -1 to 1.
[About Device Information]
We send the number of pixels of vertical and horizontal display, the type of OS and OS version.
[About OSC address]
We changed OSC address "/ / UIGID / Sensor" to "/ ZIGSIM / UUID / Sensor".
[About OSC Device Information]
we sends device information with OSC Mode like JSON Mode.
[Touch in case of OSC, About Beacon]
We send the total number of touches from "/ ZIGSIM / UUID / touchcount".
We send the total number of beacons from "/ ZIGSIM / UUID / beaconcount". 1.3.1 02/16/2017 [About touch coordinates]
The XY coordinates are handled as relative coordinates from -1 to 1.
[About Device Information]
We send the number of pixels of vertical and horizontal display, the type of OS and OS version.
[About OSC address]
We changed OSC address "/ / UIGID / Sensor" to "/ ZIGSIM / UUID / Sensor".
[About OSC Device Information]
we sends device information with OSC Mode like JSON Mode.
[Touch in case of OSC, About Beacon]
We send the total number of touches from "/ ZIGSIM / UUID / touchcount".
We send the total number of beacons from "/ ZIGSIM / UUID / beaconcount". 1.3.0 02/14/2017 Fix JSON Bug.
Rebuild for including iOS10. 1.2.1 09/20/2016 We added new 3 sensors.
・Proximity Monitor
・Mic Level (Mic Volume)
・Remote Control (headset remote control) 1.2.0 09/16/2016 Fix OSC Bug. 1.1.1 08/26/2016 [About Sensor]
Add Gravity Sensor.
[About Settings]
Add Local File Mode.
Add TCP Mode.
Support IPv6. 1.1.0 08/23/2016 ・Bug fix for using OSC format.
・Bug fix for removing touch point data. 1.0.3 06/03/2016 1.0 05/25/2016
version 1.5.1
posted on 2026-09-04
Version History Now compatible with iOS 26.
Rebuilt the networking layer for improved connection stability and
reliability — fixing timeout and communication freeze issues. Also
fixed several bugs including OSC message formatting, with broad
stability improvements throughout the app. 1.5.1 Jun 19 This app has been updated by Apple to prepare for watchOS 27 compatibility. No new features are included.
Between the app is launching, idle timer is disable.
Between OSC mode, touch force and touch radius OSC address is changed. 1.3.2 02/17/2017 * This version fix OSC Address Bug.
[About touch coordinates]
The XY coordinates are handled as relative coordinates from -1 to 1.
[About Device Information]
We send the number of pixels of vertical and horizontal display, the type of OS and OS version.
[About OSC address]
We changed OSC address "/ / UIGID / Sensor" to "/ ZIGSIM / UUID / Sensor".
[About OSC Device Information]
we sends device information with OSC Mode like JSON Mode.
[Touch in case of OSC, About Beacon]
We send the total number of touches from "/ ZIGSIM / UUID / touchcount".
We send the total number of beacons from "/ ZIGSIM / UUID / beaconcount". 1.3.1 02/16/2017 [About touch coordinates]
The XY coordinates are handled as relative coordinates from -1 to 1.
[About Device Information]
We send the number of pixels of vertical and horizontal display, the type of OS and OS version.
[About OSC address]
We changed OSC address "/ / UIGID / Sensor" to "/ ZIGSIM / UUID / Sensor".
[About OSC Device Information]
we sends device information with OSC Mode like JSON Mode.
[Touch in case of OSC, About Beacon]
We send the total number of touches from "/ ZIGSIM / UUID / touchcount".
We send the total number of beacons from "/ ZIGSIM / UUID / beaconcount". 1.3.0 02/14/2017 Fix JSON Bug.
Rebuild for including iOS10. 1.2.1 09/20/2016 We added new 3 sensors.
・Proximity Monitor
・Mic Level (Mic Volume)
・Remote Control (headset remote control) 1.2.0 09/16/2016 Fix OSC Bug. 1.1.1 08/26/2016 [About Sensor]
Add Gravity Sensor.
[About Settings]
Add Local File Mode.
Add TCP Mode.
Support IPv6. 1.1.0 08/23/2016 ・Bug fix for using OSC format.
・Bug fix for removing touch point data. 1.0.3 06/03/2016 1.0 05/25/2016
version 1.5.1
posted on 2026-08-22
Version History Now compatible with iOS 26.
Rebuilt the networking layer for improved connection stability and
reliability — fixing timeout and communication freeze issues. Also
fixed several bugs including OSC message formatting, with broad
stability improvements throughout the app. 1.5.1 Jun 19 This update from Apple will improve the functionality of this app. No new features are included.
Between the app is launching, idle timer is disable.
Between OSC mode, touch force and touch radius OSC address is changed. 1.3.2 02/17/2017 * This version fix OSC Address Bug.
[About touch coordinates]
The XY coordinates are handled as relative coordinates from -1 to 1.
[About Device Information]
We send the number of pixels of vertical and horizontal display, the type of OS and OS version.
[About OSC address]
We changed OSC address "/ / UIGID / Sensor" to "/ ZIGSIM / UUID / Sensor".
[About OSC Device Information]
we sends device information with OSC Mode like JSON Mode.
[Touch in case of OSC, About Beacon]
We send the total number of touches from "/ ZIGSIM / UUID / touchcount".
We send the total number of beacons from "/ ZIGSIM / UUID / beaconcount". 1.3.1 02/16/2017 [About touch coordinates]
The XY coordinates are handled as relative coordinates from -1 to 1.
[About Device Information]
We send the number of pixels of vertical and horizontal display, the type of OS and OS version.
[About OSC address]
We changed OSC address "/ / UIGID / Sensor" to "/ ZIGSIM / UUID / Sensor".
[About OSC Device Information]
we sends device information with OSC Mode like JSON Mode.
[Touch in case of OSC, About Beacon]
We send the total number of touches from "/ ZIGSIM / UUID / touchcount".
We send the total number of beacons from "/ ZIGSIM / UUID / beaconcount". 1.3.0 02/14/2017 Fix JSON Bug.
Rebuild for including iOS10. 1.2.1 09/20/2016 We added new 3 sensors.
・Proximity Monitor
・Mic Level (Mic Volume)
・Remote Control (headset remote control) 1.2.0 09/16/2016 Fix OSC Bug. 1.1.1 08/26/2016 [About Sensor]
Add Gravity Sensor.
[About Settings]
Add Local File Mode.
Add TCP Mode.
Support IPv6. 1.1.0 08/23/2016 ・Bug fix for using OSC format.
・Bug fix for removing touch point data. 1.0.3 06/03/2016 1.0 05/25/2016
version 1.3.2
posted on 2026-06-05
Version History This update from Apple will improve the functionality of this app. No new features are included.
Between the app is launching, idle timer is disable.
Between OSC mode, touch force and touch radius OSC address is changed. 1.3.2 02/17/2017 * This version fix OSC Address Bug.
[About touch coordinates]
The XY coordinates are handled as relative coordinates from -1 to 1.
[About Device Information]
We send the number of pixels of vertical and horizontal display, the type of OS and OS version.
[About OSC address]
We changed OSC address "/ / UIGID / Sensor" to "/ ZIGSIM / UUID / Sensor".
[About OSC Device Information]
we sends device information with OSC Mode like JSON Mode.
[Touch in case of OSC, About Beacon]
We send the total number of touches from "/ ZIGSIM / UUID / touchcount".
We send the total number of beacons from "/ ZIGSIM / UUID / beaconcount". 1.3.1 02/16/2017 [About touch coordinates]
The XY coordinates are handled as relative coordinates from -1 to 1.
[About Device Information]
We send the number of pixels of vertical and horizontal display, the type of OS and OS version.
[About OSC address]
We changed OSC address "/ / UIGID / Sensor" to "/ ZIGSIM / UUID / Sensor".
[About OSC Device Information]
we sends device information with OSC Mode like JSON Mode.
[Touch in case of OSC, About Beacon]
We send the total number of touches from "/ ZIGSIM / UUID / touchcount".
We send the total number of beacons from "/ ZIGSIM / UUID / beaconcount". 1.3.0 02/14/2017 Fix JSON Bug.
Rebuild for including iOS10. 1.2.1 09/20/2016 We added new 3 sensors.
・Proximity Monitor
・Mic Level (Mic Volume)
・Remote Control (headset remote control) 1.2.0 09/16/2016 Fix OSC Bug. 1.1.1 08/26/2016 [About Sensor]
Add Gravity Sensor.
[About Settings]
Add Local File Mode.
Add TCP Mode.
Support IPv6. 1.1.0 08/23/2016 ・Bug fix for using OSC format.
・Bug fix for removing touch point data. 1.0.3 06/03/2016 1.0 05/25/2016
version 1.3.2
posted on 2017-02-17
Feb 17, 2017
Version 1.3.2
This app has been updated by Apple to display the Apple Watch app icon.
Between the app is launching, idle timer is disable.
Between OSC mode, touch force and touch radius OSC address is changed.
version 1.3.2
posted on 2017-02-17
This app has been updated by Apple to display the Apple Watch app icon.
Between the app is launching, idle timer is disable.
Between OSC mode, touch force and touch radius OSC address is changed.
Disclaimer
Official App Store Link
We do not host ZIG SIM on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for ZIG SIM is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.
